How to Root Galaxy S4 GT- I9500?

How to Root Samsung Galaxy S4 GT- I9500 :

Step 1 :

• Initially you have to download it’s rooting package. If you don’t know from where to download it, you can get it directly from the below link.
• DOWNLOAD HERE or Download Cofface’s Rooting package :

Step 2 :

• To run the installation process you need to download Odin tool. You can download the latest Odin tool from the below link. 
• DOWNLOAD HERE or Download Odin Tool :

Step 3 :

• Now, turn your device off and send it to Download Mode. 
• Press and hold Volume down+ home button together. When you see something on your display kindly press Power button once. (There could be Android Logo on your screen.)

Step 4 :

• Then after, launch the Odin tool on your PC and at the same time, connect your device by using a proper data cable to the PC to complete the process. 

Step 5 :

• Once your device get successfully connected to your PC, the Odin box on your desktop will turn Yellow. It means you can start your further process on your device.

Step 6 :

• Click on PDA and select cofface_samsungI9500_recovery_en_0503.tar file.

Step 7 :

• Make sure Auto Reboot and F.Reset Time options are enabled on your Odin tool .

Step 8 :

• Double check everything and click on to Start option. 

Step 9 :

• Rooting process will automatically start by now. It takes a few seconds to complete the process. 

Step 10 :

• After it get done successfully you will have a PASS message on from the Odin tool. 

Step 11 :

• Congratulations! You’re Samsung Galaxy S4 GT- I9500 smartphone is a complete rooted one. By now you are allowed to install any custom firmware on it. 

This is what you need to know to root your newly purchased high end smartphone, Galaxy S4. Make sure you are good with this process and if there’s any problem found, drop a comment below the post.

Read more »

How to Root Samsung Galaxy S3 I9300 on Official Android 4.1.2?

Note:

• This update is only available for the international version of Galaxy S3 device i.e. Samsung Galaxy S3 I9300.
• This is not a legal way, after rooting your device you might lose your phone’s warranty for sure.

Requirements to root your Galaxy S3 :

• Install USB drivers for Samsung Galaxy S3 in your PC on which you are going to perform this task
• Make your phone debugging enabled.
• Go to:-  Menu>> Settings>> Applications> Development < USB Debugging Mode Turn On
• Before moving further with this process, you need to take a backup of your device
• Ensure that your device battery is charged up to 85%
• You need to have a proper USB data cable with you
• After ensuring all these things you can now be able to root your Galaxy S3 phone. Let’s get started…

How to Root Samsung Galaxy S3 I9300 on Official Android 4.1.2 firmaware?

Step 1 :

• Download the Rooting package of your Galaxy S3 from the below link.
• DOWNLOAD HERE or Download  CF-Auto-Root-SGS3-v6.4

Step 2: 

• Extract files from the downloaded folder to your PC.

Step 3:

• To install Jelly Bin firmware you need to download Odin3 package.
• Download Odin 3 for Jelly Bean firmware

Step 4:

• Put your Galaxy S3 in complete switch off mode.

Step 5 :

• Put it into a Download mode.

1. press and hold the Volume Down
2. Home and Power buttons together for a few seconds
3. Press the power button again after seeing an Android Robot on your screen

Step 6:

• Run Odin package on your PC.

Step 7:

• Connect your Galaxy S3 device by using a proper data cable to your PC.

Step 8:

• Click on PDA and select the CF-Auto-Root-SGS3-v6.4.tar file from the odin package.

Step 9 :

• Make sure you have selected an auto reboot option in Odin package.

Step 10:

• Check all the options well click on to Begin button from Odin Package. Your installation will start by now.

Step 11:

• This process will takes a few minutes to install the things in your Galaxy S3.

Step 12 :

• Once it get done, the phone will automatically starts. After the home screen appears there, you can simply remove your phone from a Data Cable.

Step 13 :

• Your phone is now running on an official Android 4.1.2 with a successful rooting process. You are now allowed to make and install any other ROMs or firmware within this Rooted Galaxy S3 device. You can make most of it with this root process.

We are always looking for your feedback and we would love to interact with you. Your thoughts and opinions are always welcomed. Kindly put them as a comment below this post. Stay tuned for some more Android tricks.

Read more »

How To Crack Lockscreen Pattern on Android

What's up peeps!?! SO have you ever set a lockscreen pattern on your phone or tablet and forgot what it was, or perhaps you're an FBI agent trying to break into someone else's device. Well there are ways to do these things using adb. Now this may not work on all device, I only have done this with the galaxy nexus.

(Thanks to xda user myungz for the code)

DOWNLOAD HERE
tools.zip download link: https://docs.google.com/file/d/0B5LGb...

code:
adb devices
(If you get no devices, download the drivers for your device)

Htc 32 bit here:http://www.android-advice.com/file-do...

HTC 64 bit here: http://www.android-advice.com/file-do...

samsung galaxy s iii users check here: http://www.samsung.com/us/support/dow...

adb shell
su
rm /data/system/locksettings.db
rm /data/system/locksttings.db-wal
rm /data/system/locksettings.db-shm

Video Here 

Read more »

HTC one X FREE Unlock

 

 

HTC ONE X FREE UNLOCK

1) You need root
2) You need Terminal Emulator (free from the market)

Open the Terminal Emulator app and type:

su [enter]
strings -n 8 /dev/block/mmcblk0p6 [enter]

It will output several lines of data.
One the One S, towards the bottom are 2 lines. One contains your IMEI number, the other reads UN_Lock_code=063312345 (for example)

This is NOT the SIM unlock code - don't use it!

or Check Here..
http://forum.xda-developers.com/showthread.php?t=1694553

Read more »

How To Update Firmware Of Samsung P1000 Galaxy Tab

in this Tutorial We will try to give you the right steps to Update its Firmware.

Tools: Samsung P1000 Download Program - USB cable.

Firmwares: Samsung P1000 Galaxy Tab Firmwares

Samsung P1000 Galaxy Tab USB Drivers

Firmware Update Steps:

1. Run Samsung P1000 Download program.
2. Check these Three Options: Re-Partition + Auto Reboot + F.Reset Time.
3. Select PIT file in its field.
4. Put Device Into Download Mode ( Press Volume Down + Power ).
5. Connect Cable To Phone.
6. Make sure ID:COM box highlighted yellow that the device is connected to the PC.
7. Start Downloading PIT file by clicking Start Button. Then wait for "Pass" to be appear on the screen.
8. Click on Reset button, then unselect Re-Partition box. Then select PDA, PHONE and CSC Files each in his field.
9. Put Device into Download Mode again, then connect to the PC.
10. Start Downloading PDA, PHONE and CSC files by clicking Start Button. Then wait for "Pass" to be appear on the screen.
11. After all is done reboot the phone and Do Full Reset: *2767*3855#.

Read more »

How to Root XXUAMDM Android 4.2.2 on Galaxy S4 I9505 LTE Jelly Bean Official Firmware

Note :

• Rooting voids warranty period of that particular device. If you don’t want to lose your phone’s warranty, you are requested not to apply this Rooting process on your device. You can get back your warranty period by unrooting the device. 

Requirements: 

• This process is only applicable on Samsung Galaxy S4 I9505 LTE. 
• Make sure your device is charged enough to load this process.
• Have a proper data cable to connect this device to the PC.
• Take a good backup of your device’s data.

Rooting is not as hard as you think, it’s simple process having some steps to be completed which can get you a rooted device right away. Below we have enlisted all the points which are essential to root your Samsung Galaxy S4 LTE smartphone. Do follow each steps wisely and get the best results.

Root Android 4.2.2 on Galaxy S4 I9505 LTE Jelly Bean Official Firmware :

Step 1 :

• Initially you have to download a direct root software. This software will allows you to root your device within no time. If you don’d know from where to download this software, you can get it from the below link.
• Download CF-Auto-Root Android 4.2.2 Package:

Step 2 :

• Now, to run this Rooting process on your PC, you need to download Odin tool. You can get this tool from the below link.
• Download ODIN v1.85 

Step 3 :

• Then after turn off your device and send it to download mode. You can do so by pressing and holding Volume down + home buttons together. When you see something on your display press Power button to confirm the download mode. 

Step 4 :

• Run the Odin tool by right clicking on to the downloaded file. 

Step 5 :

• Now, connect your Samsung Galaxy S4 device by using a proper data cable to the PC. Make sure you are still on your device’s download mode. 

Step 6 :

• When the device get successfully connected to the PC, Odin box will turn Yellow. It means your device is connected well to the PC and now can run the Rooting process. 

Step 7 :

• Now, from the Odin tool, click on to PDA option and browse the above downloaded Rooting package file CF-Auto-Root-jflte-jfltexx-gti9505.zip. 

Step 8 :

• Double check all the options again. Make sure Auto Reboot and F.Reset Time options are enabled on your Odin tool. 

Step 9 :

• To run the process, click on to Start button from the Odin tool. 

Step 10 :

• Rooting process will automatically starts on your device. It takes a few seconds to complete the process. 

Step 11 :

• After a few seconds you will have a PASS message on your Odin tool which says you have successfully rooted your device.

Step 12 :

• Now, unplug your device from the PC. 

This is what you need to follow to root your XXUAMDM Android 4.2.2 on Galaxy S4 I9505 LTE Jelly Bean Official Firmware. Do let us know your views and opinions on this process as a comment below the post.

Read more »

How To Update Galaxy Note N7000 To Official Jelly Bean Firmware Android 4.1.1

DOWNLOAD HERE
or Here

Video Here...

Read more »

How To Install Android 4.1.2 Jelly Bean Official Firmware Update Released For AT&T Samsung Galaxy Note (SGH-I717)

Installation Tutorial
DOWNLOAD HERE
or Here......
Step 1: Download I717UCMD3 Android 4.1.2 Jelly Bean Stock Firmware and extract the zip file.
Step 2: Download Odin v3.07 and extract the file.
Step 3: Switch off the phone and put it on the Download Mode. To do this, press Volume Down + Home + Power buttons and then press Volume Up when the Warning message appears.
Step 4: Run Odin as an Administrator.
Step 5: Connect Galaxy Note to your computer via the USB cable while in the Download mode.
If the phone is connected properly, you will see that the ID: COM section turns Yellow. If not, check whether the USB drivers are installed properly in your computer.
Step 6: In Odin, click on PDA and select the “Kies_Home_I717UCMD3_I717ATTMD3.tar.md5” file that you have got after extracting the I717UCMD3 Firmware Package in Step 1.
Step 7: In the Odin, make sure that Auto Reboot and F. Reset Time checkboxes are selected. If you are using a .pit file, ensure that re-partition checkbox is selected. Otherwise, leave it unchecked along with Flash Lock and LED Control checkboxes.
Step 8: Click on the Start button in Odin to begin the installation process.
Step 9: After the installation is complete, the device will restart on its own. Once you get the Samsung logo on the home screen, unplug the device from the computer.
In case your device gets stuck at booting during the installation, go to the recovery mode (switch off the device and press Volume Up + Home + Power buttons). Once you are in the Recovery mode, select the option of “Wipe Data/ Factory Reset.”
This is all you have to do, the Samsung Galaxy Note (SGH-I717) should now be running on the official I717UCMD3 Android 4.1.2 Jelly Bean firmware.

Read more »

How To Update Galaxy Y S5360 to Android 4.1.2 Jelly Bean Taste ROM Custom Firmware

 

HOW TO: Install Taste ROM Android 4.1 Jelly Bean on Samsung Galaxy Y S5360

We have put together a detailed step-by-step instructions guide on how to install Taste ROM Android 4.1 Jelly Bean custom firmware on Galaxy Y S5360. If you are used to installing custom ROMs on your Galaxy Y S5360, then this should not be any different for you.
However, for beginners, you need to root your Samsung Galaxy Y and install a custom recovery. Please Google that up if you are unsure and make sure you read the tutorial once before actually performing it on your device.

To Remember:

• This tutorial is only for installing Taste ROM Android 4.1 ROM on Samsung Galaxy Y S5360. Please do not try on any other Galaxy Y variants.
• Your phone should be rooted and have ClockworkMod recovery installed from before.
• This tutorial will wipe out all your data. Proceed at your own risk.
• Perform a Dalvik Cache wipe before proceeding from the recovery mode.
• Samsung KIES will NOT detect your phone after installing this ROM because it is a custom firmware.
• Make sure you backup all your data in your phone before proceeding.

Complete Step-By-Step Instructions:

NOTE: Jelly Bean Taste is a custom ROM based on Android 2.3.6 DXLF1 and is heavily modded and several tweaks have been installed to look Jelly Bean Android 4.1.

 

DOWNLOAD HERE

Step 1 - Download Taste ROM Android 4.1 ROM for Galaxy Y to your computer.

Step 2 - Connect and mount your Galaxy Y USB memory on your computer using the USB cable.

Step 3 - Now copy/paste the downloaded Android 4.1 ROM zip file to your SD card. Make sure the file is in the SD card root (not in any folder).

Step 4 - Then turn OFF your phone and disconnect from the USB cable.

Step 5 - Now to get in the Recovery Mode. Switch ON the phone while pressing and holding Volume Up + Home + Power buttons together. You will get an exclamation mark now. Again, hold your Volume Up + Power buttons. You should now be in your Recovery Mode. 

Step 6 - Once you are in ClockworkMod Recovery, select perform a full data wipe by selecting “wipe data/factory reset”  Use the Power button to select everything while in the Recovery Mode.

Step 7 - Then, perform a cache wipe by selecting “wipe cache partition” as you can see in the image below.

Step 8 - Now this is optional, but it is recommended to perform a wipe of your dalvik cache as well. You will not get into boot loops or any other errors. From CWM recovery, go to ‘advanced’ and then select “wipe dalvik cache”.

Step 9 - Then go back to the main recovery screen and select “install zip from SD card”.

Step 10 - Now select “choose zip from sdcard”. Using your volume keys, navigate to the Android 4.0 ROM zip file that you copied to your SD card and select it using the Power button. Confirm the installation on the next screen and the installation procedure should start now.

Step 11 - After the installation completes, go to “+++++Go Back+++++” and reboot the phone by selecting “reboot system now” 

Your Galaxy Y S5360 will boot now and it might take about 5 minutes to boot on your first time. So, please wait.
That’s it! Your Galaxy Y should now have Taste ROM Android 4.2 Jelly Bean custom ROM installed on your phone! Go to Settings > About phone to verify.

Read more »

HTC ONE FREE SIM Unlock here !

Hello to all,

I have very good news

Here are the simple steps to SIM unlock any HTC ONE .


!!! WARNING !!!

I dont take any responsibility if any process goes wrong, this is FREE method and use it on your own risk !

Also, after this, it may not work on ORIGINAL network!

Please be aware of what you are doing !



You should have root access on your phone, (if you dont know how to do it, please search the forum)

In adb shell or terminal emulator

Type the following commands:

Code:

su

am start com.redbend.vdmc/com.htc.omadm.test.TestMainActivity

Select API
Then scroll down and select Simlock

Happy unlocking times

This works on BAD ESN phones as well .

This may work on other HTC devices as well, please post if you succeeded on other devices also .


Credits go to hotaru2k3 who found this method .



With Best Regards,
BB-gsm

Read more »

How To Galaxy Updated Galaxy S3 I9300 to Android 4.2.2 Jelly Bean with AOKP Build 6 ROM

 

Galaxy S3 I9300 Gets Updated to Android 4.2.2 Jelly Bean with AOKP Build 6 ROM.

The Galaxy S3 I9300 has had access to the latest Jelly Bean firmware update through a spate of recent custom ROM releases, even though Samsung is yet to roll out an official version of the latest Jelly Bean firmware for the handset. Android Open Kang Project (AOKP) Build 6 ROM is the latest custom release to offer Android 4.2.2 Jelly Bean support for the Galaxy S3 I9300, which brings a Nexus-like stock Android experience while enabling users to customise their handsets more than ever before.
Android 4.2.2 Jelly Bean Based AOKP Build 6 ROM Features

•  Fully revamped NavBar and Lockscreen UI in ROMControl
•  Themeable lockscreen
•  Scrollable toggleS are back
•  WebGL on the Nexus 10
•  Option to daydream on wireless charger
•  Volume adjust sound preference
•  Open source Superuser thanks to Koush
•  StatusBar hide toggle
•  Sleep toggle

Key Points to Note

•  AOKP Build 6 ROM and the instructions given in this guide are meant for the international variant Galaxy S3 I9300 model only and will not work on any other device. Verify the device's model number by navigating to Settings > AboutPhone.
•  Verify that the correct USB drivers are installed for the phone on computer (download Samsung Galaxy S3 I9300 USB drivers).
•  Back up important data and settings on phone using one of the recommended custom recovery tools such as ClockworkMod (CWM) or TWRP, as it creates a complete image of the existing phone setup.
•  Ensure that USB Debugging mode is enabled on the phone navigating to Settings > Developer Options (if the device is running on Android 4.0 or later) or Settings >Applications> Development (if the phone is running on Android 2.3 or earlier). Otherwise, if the device is running Android 4.2, then perform the following steps:
  •  Go to Settings > About Phone
  •  Scroll down to the bottom of the screen and select Build Number
  •  Tap the phone's Build Number seven times to unlock or reveal the hidden Developer Options under Settings. Then select the checkbox to enable USB Debugging mode under Settings > Developer Options.
•  Make sure that the phone has at least 80 per cent battery charge to prevent unexpected device shutdown (due to battery drain) during firmware installation, as this may inadvertently brick or damage the device.
•  Double check to see that the device is factory unlocked (not locked to a specific carrier) and rooted with CWM recovery installed on it.
•  Perform a Dalvik Cache Wipe before continuing from Recovery mode.
•  The phone will not be recognised by Samsung KIES after installing the ROM, as it is a custom release.
•  The instructions provided in this guide are meant for reference purpose only. IBTimes UK will not be held liable if the device is damaged during or after the firmware installation. Users must proceed at their own risk.

How to Update Galaxy S3 I9300 to Android 4.2.2 Jelly Bean with AOKP Build 6 ROM

DOWNLOAD HERE

Step 1 - Download Android 4.2.2 AOKP Build 6 ROM and Google Apps for Galaxy S3 on the computer.
Step 2 - Connect and mount the Galaxy S3 USB mass storage on computer with the USB cable.
Step 3 - Copy the downloaded AOKP Build 6 ROM and Google Apps zip files to the root folder on the phone's SD card.
Step 4 - Power off the phone and disconnect its USB cable from computer.
Step 5 - Boot the device into Recovery Mode by pressing and holding Volume Up, Home and Power buttons together.
Step 6 - After the device enters ClockworkMod Recovery, do a full data wipe by choosing Wipe Data/Factory Reset option. Note: Use Volume keys to navigate between options and the Power button to select an option in Recovery.
Step 7 - Perform Wipe Cache Partition followed by Wipe Dalvik Cache from advanced option in CWM Recovery.
Step 8 - Return to main recovery screen and click Install Zip from SD card.
Step 10 - Select Choose Zip from SD card. Browse to the Android 4.2.2 ROM zip file that you copied earlier to the phone's SD card and select it by tapping Power button. Confirm the ROM installation on next screen and the installation process should begin.
Google Apps: Repeat the Step 10 for installing Google Apps as well.
Step 11 - Once both the ROM and Google Apps are installed, go to "+++++Go Back+++++" and reboot the phone by tapping Reboot System Now in the recovery menu. The phone will reboot now and the first boot might take about 5 minutes to complete. So, please be patient.
Galaxy S3 I9300 is now successfully updated to Android 4.2.2 based AOKP Build 6 custom ROM Go to Settings > About phone to verify the firmware version installed.
[Source: Team Android]

Read more »

[Guide] How to Upgrade Your HTC Android Phone with a microSD card

1. Extract rom.zip from an RUU

A. Run the RUU. For example, you want to update your Desire HD with RUU_Ace_Sense30_S_HTC_WWE_3.12.405.1_Radio_12.65.6 0.29_26.14.04.28_M_release_225512_signed.exe. Run this file and wait till extract (you'll see a bar going from left to right) and after that leave it as it is (don't click next or don't close the program)

B. Go to your PC temp folder. For win7 its C:\Users\<user name>\AppData\Local\Temp and for winXP its C:\Documents and Settings\<user name>\Local Settings\Temp and look for the last created folder. Open that.

C. You'll get a rom.zip file there. Copy it to desktop or other suitable place. Now you can close the RUU program.

2. Rename the rom.zip file

A. You can't directly update the rom.zip file. You've to rename it according to your phone model number. Look for the model number in the serial sticker under battery. For Desire HD its PD98100, for Wildfire S its PG76100 etc. Take first four letter from this model number and then add IMG. So, for example for Desire HD rom.zip should be renamed as PD98IMG.zip and for Wildfire S it should be remaned as PG76IMG.zip

B. Now put this renamed file to a microSD card.

3. Update the ROM

A. Insert the card to microSD slot of the phone.

B. Power on the phone in HBOOT mode with microSD inserted. For most HTC android phones you have to press VolDown then Power to go to HBOOT mode. Wait for a while, phone will read the zip file and will ask you for update confirmaton. Read the screen instruction and press required button.

C. Update will start. Be patient and wait till being finished.

!!! CONGRATULATIONS !!! YOU'VE UPGRADED YOUR PHONE !!!

Common Errors:
* CID Incorrect : means you are trying wrong region ROM. Use correct region ROM or use Gold Card or make your phone superCID first.
* MODEL Incorrect : you're using other phone's ROM. you can't do it.
* Main Version Low : means phone's HBOOT version is higher than the ROM in your SD card. Use same or higher HBOOT rom's or S-OFF you phone.

Read more »

How to Root Galaxy Note 2 N7100 on XXDME1 Android 4.1.2 Firmware?

Official stock firmware removes rooting access of that particular device. If you have installed this new official stock firmware on your Galaxy Note 2, you might want to root it again. From the below step by step detailed guide, will get you a rooted Galaxy Note 2 device. Let’s get on to it directly.
Prerequisites :

• Your PC must have installed proper ADB drivers of your device.
• Your device’s battery should be charged up to 80 %
• Enable USB debugging on your device.
• Settings> Developer Options< Toggle on

How to Root Galaxy Note 2 N7100 on XXDME1 Android 4.1.2 Firmware :

Step 1 :

• Download auto root file for for XXDME1 Android 4.1.2 Jelly Bean firmware. If you don’t know from where to download this, you can follow the below link to get it download right away. 
• Download Root Kit :

Step 2 :

• Download Odin tool to run the installation process on your device. You can get it from the below link.
• Download Odin Tool :

Step 3 :

• Turn your device off and send it to download mode. You can do so by pressing and holding Volume down+Home+ buttons together. When there’s some warning on your device’s display, kindly press the Power button to enter into download mode. 

Step 4 :

• Now, run the above download Odin tool on your PC and at the same time connect your Note 2 device with a proper data cable. 

Step 5 :

• When the device get successfully connected to your PC, the Odin tool box will turn into Yellow. It means your device is now capable enough to run this process.

Step 6 :

• Now, click on PDA button and browse the file which ended with TAR.md5. 

Step 7 :

• Make sure the “Auto Reboot” and “F. Reset Time” options are enabled on your Odin tool.

Step 8 :

• To begin the installation process, click on to Start button from the Odin tool.

Step 9 :

• After it get completed, you will have a PASS message on your desktop from Odin tool. Which says, you are done with the installation process. 

Step 10 :

• By now, your device will go restart itself and this time it takes several minutes to complete the installation process.

Step 11 :

• Congratulations! Your Samsung Galaxy Note 2 N7100 device is now successfully rooted on XXDME1 Android 4.1.2 official firmware.

Read more »

How to Downgrade Galaxy S3 I9300 to Android 4.0.4 ICS

Requirements: 

• Your PC must have installed proper Samsung KIES for this device to install USB drivers and other important files. You can follow this link to go further. 
• Take a good backup of your Galaxy S3
• Make sure your S3′s battery is charged up to 70% to load the installation process
• Have a proper data cable to connect your phone to the PC

Downgrade Galaxy S3 I9300 to Android 4.0.4 ICS Stock Firmware :

Step 1 :

• Initially you need to download Stock firmware of Android 4.0.4 ICS for your Galaxy S3. You can follow the below link to download this update. 
• DOWNLOAD HERE or ..
• Download ICS Stock firmware :

Step 2 :

• Secondly you need to download Odin Tool to run the installation process. You can get it from the below link.
• Download Odin Tool :

Step 3 :

• After downloading both files, extract them on your desktop. 

Step 4 :

• Now, turn your Galaxy S3 off and connect it to your PC by using a proper data cable. 

Step 5 :

• At the time of connecting it to the PC you need to send it to the download mode. You can do so by pressing and holding Volume down and Home button together. When you see something on your device’s screen press power button at once and you’ll have a download mode of your S3. 

Step 6 :

• Now, go to the desktop and run the Odin tool on your PC. 

Step 7 :

• It will automatically connect your phone to this tool. When it get successfully connected to your PC Odin’s first box will turn Yellow. 

Step 8 :

• Now, select PDA option from your Odin tool and then browse .tar.md5 named file. 

Step 9 :

• Double check all the mentioned points well and then click on to START button. 

Step 10 :

• Your installation will take place by now. It takes a few seconds to complete the installation. 

Step 11 :

• After some time there will be a message on your Odin tool saying PASS. It means you have successfully downgrade your Galaxy S3 to Android 4.0.4 ICS stock firmware back.

Step 12 :

• Your Galaxy S3 will be working great on its original OS.

Read more »

How To Hard Reset Samsung I8190 Galaxy S3

You can apply this operation in many cases, We will mention some of them here:

- After installing bad or unsupported application into your Samsung mobile phone which causes your phone to be frozen.
- Your Samsung mobile phone doesn't respond to any order after booting because of some software errors.
- Forgotten pattern lock in Samsung Android mobile phones.
- Forgotten user code.
- Forgotten phone code.
- Before or after installing new firmware updates into your device.
- You want to delete all your personal information from your device in case you want to sell it.
- You Bought a second hand device and you want to wipe all stored data from it.

What to do before performing the Hard Reset?

- In case your Samsung mobile phone can connect to a computer then it is better to make a backup of your saved data using Samsung kies software.
- Check that your phone's battery has enough charging, Otherwise you should charge it.

Samsung I8190 Galaxy S3 Mini Hard Reset Steps:

- Make sure that your Samsung I8190 Galaxy S3 Mini is Off, And has no SIM or Memory cards are inside.

- Take out its battery for 10 seconds, Then put it in again.

- Press and hold Volume Up + Home Keys, Then press Power.

- Keep pressing the above keys until Samsung logo appears,Then release all keys.

- Wait until you are into Factory reset / System Recovery menu.

- Use Volume Down key to scroll down and select Wipe Data / Factory Reset option.

- Use Power button to confirm the operation.

- You need to use the Volume Down key again to select "Yes -- delete all user data"

- Use Power button to confirm the operation one more time.

- After performing the hard reset, Select Reboot System Now option, And confirm it using Power button.

- Now the phone will reboots, Wait for it to be fully on and then you can start using it.

Notice: The Hard Reset / Factory Reset operation will delete anything that are saved in your phone's internal memory, So make a backup of your data in case you can access them.

Read more »

How To Update Galaxy Ace Duos S6802 to A-Droid V 2.0 Custom Rom [XDA]

HOW TO: Install A-Droid V 2.0 Custom Rom on Galaxy Ace Duos S6802

We have put together a detailed step-by-step instructions guide on how to install A-Droid V 2.0 Custom Rom on Galaxy Ace Duos S6802. If you are used to installing custom ROMs on your  Galaxy Ace Duos S6802, then this should not be any different for you.

However, for beginners, you need to root your Samsung  Galaxy Ace Duos S6802 and install a custom recovery. Please Google that up if you are unsure and make sure you read the tutorial once before actually performing it on your device.

Complete Step-By-Step Instructions:

NOTE: A-Droid V 2.0 is a custom ROM based on Android 2.3.6 XXMA1  and is heavily modded and several tweaks have been installed to look Xperia Droid.

DOWNLOAD HERE

Step 1 - Download A-Droid V 2.0 Custom Rom for Galaxy Ace Duos to your computer.

Step 2 - Connect and mount your Galaxy Ace Duos USB memory on your computer using the USB cable.

Step 3 - Now copy/paste the downloaded A-Droid V 2.0 Custom Rom zip file to your SD card. Make sure the file is in the SD card root (not in any folder).

Step 4 - Then turn OFF your phone and disconnect from the USB cable.

Step 5 - Now to get in the Recovery Mode. Switch ON the phone while pressing and holding Volume Up + Home + Power buttons together. You will get an exclamation mark now. Again, hold your Volume Up + Power buttons. You should now be in your Recovery Mode.

Step 6 - Once you are in ClockworkMod Recovery, select perform a full data wipe by selecting “wipe data/factory reset”  Use the Power button to select everything while in the Recovery Mode.

Step 7 - Then, perform a cache wipe by selecting “wipe cache partition” as you can see in the image below.

Step 8 - Now this is optional, but it is recommended to perform a wipe of your dalvik cache as well. You will not get into boot loops or any other errors. From CWM recovery, go to ‘advanced’ and then select “wipe dalvik cache”.

Step 9 - Then go back to the main recovery screen and select “install zip from SD card”.

Step 10 - Now select “choose zip from sdcard”. Using your volume keys, navigate to theA-Droid V 2.0 Custom Rom zip file that you copied to your SD card and select it using the Power button. Confirm the installation on the next screen and the installation procedure should start now.

Step 11 - After the installation completes, go to “+++++Go Back+++++” and reboot the phone by selecting “reboot system now”

Your Galaxy Ace Duos S6802 will boot now and it might take about 5 minutes to boot on your first time. So, please wait.
That’s it! Your Galaxy Ace Duos should now have  A-Droid V 2.0 custom ROM installed on your phone! Go to Settings > About phone to verify.

Read more »

How To hard reset sony ericsson sk17i

Try This Solution :
use this code, i am sure you will be success....

*#*#7378423#*#*

choose reset option and get reset your phone,

Read more »

How to Root Samsung Galaxy Ace S5830?

 

Pre-requisites to Root Galaxy Ace S5830-

• Backup all your phone data like messages, contacts, call log and other important files as there’s always a risk involved of data loss in rooting process.
• Before you jump into rooting process, make sure that your phone is charged to at least 50%.
• Make sure you’ve enabled the USB debugging in your phone. If you haven’t enabled it yet, enable USB debugging by pointing your phone to Settings > Applications > Development > USB Debugging.

Make sure that you’ve follow the entire required preliminary needs as ignoring any one of them can eventually put you in trouble.

 Rooting Instructions-

• First of all you need a rooting Package for rooting your Galaxy ACE. Download the rooting-package from here.
• After downloading the package, connect your phone with computer through USB cable only.
• Transfer the rooting Package to your phone’s SD card without touching or altering its name.
• Now switch off your phone and restart it into recovery mode. If you don’t know how to boot into recovery mood then hold the volume up + ok button and while holding them together press the power button. Keep the three buttons pressed until you’re booted to recovery Mode.
• After booting into booting mode, select the option “Install zip from SD Card”and confirm it. You can use volume up and volume down keys for navigation and power button for confirming a selection.
• After confirming the rooting process, wait for 3-5 minutes until it finishes installing the package. Once installed, your phone will be rebooted automatically. If somehow, it fails to reboot, reboot it manually.

Read more »

How To Repair Samsung p1000 Stuck Logo?

Try This Solutions :
1.follow these steps to recover your phone first

DOWNLOAD HERE
or Here P1000JPJM5.z01


open odin

tick repartion and the other two

select p1000 hidden pit in the pit tab, google and download it
put your phone in download mode by holding volumedown+power

connect to pc, when odin detects, click start

when odin shows passed

put phone in download mode again, click reset on odin, open the downloaded firmware

and select pda, modem,csc, dont choose pit

connect phone again and click start, may take up to 2 minutes to start but be petient

till odin finish and shows pass

phone will reboot and be ok.

Read more »

Samsung galaxy Mini GT - S 5570 Hardreset ( How To )

Try This :

1. Power off phone
2. Press and hold Menu Button ( middle ) + power on for at least 10 seconds
3. Android System Recovery Mode Appear
4. There are 4 options

reboot system now

apply sdcard:update.zip

wipe data/factory reset

wipe cache partition

5. Move the options to " Wipe data / factory reset " using volume down ( - ) button and menu button to confirm, because the touchscreen doesn't work in reovery mode
6. After the process done, phone will reboot.

Read more »